IS-10-NC
.jpg)
.jpg)
To give on-off control of flows.
Typical usage includes the control of actuators in a hydraulic system.
With the valve version and de-energised solenoid, the oil flow is stopped from port 1 to port 2 and is closed from port 2 to port 1 as well.
When the solenoid is energised, the flow is free from port 2 to port 1 or port 1 to port 2.
Rated Flow :
22 l/min
Max. pressure :
210 bar
Oil leaks from port 2 to port 1 :
120 ml/min at 210 bar and oil viscosity of 46 cSt
Working temperature :
Min. -20℃ , Max. 90℃ , with standard BUNAN gaskets
Min. -20℃ , Max. 120℃ , with optional VITON gaskets on request
Fluid :
best use mineral oil with viscosity ranging between 10 and 200 cSt
Filter :
25 micron or better
Cavities :
see cavity data 10-02
Installation :
before screwing the cartridge on the valve body, ascertain to provide suitable gasket lubrication with clean oil and also be sure to screw the cartridge manually in to reach against the gaskets in the valve body.